Whole Borough Planning Overview

Conversion of roof space to habitable use to include a rear dormer with Juliette balcony, erection of a two storey extension to the rear, amendments to fenestrations

Erection of a single storey side/rear extension, and part first floor extension

Erection of an outbuilding to rear garden.

Proposed loft conversion including hip to gable side of roof and rear dormer.

The property is in use as a Class C4 House in Multiple Occupation (HMO) comprising six individual lettable rooms occupied by unrelated residents who share communal kitchen and circulation facilities. The use was fully established and actively occupied prior to the Article 4 Direction coming into force on 11 December 2025, as evidenced by statutory declarations, tenancy agreements, operational invoices, management statements, bank records and written confirmation from the Council's Planning Enforcement Officer following site inspections on 9 July 2025 and 1 September 2025.

Construction of dwelling, Driveway with Electric Charging Point and 2x Parking and Cycle Spaces

TPO 558 T1 1x Lime to reduce height up to 3m and lateral spread on all sides by up to 2.5m.

TPO 399 A1 Group of Hornbeam Group to sectional dismantle using rigging equipment the medium group (Right side of property, rear garden).1x Oak (Right side of property, rear garden) Reduce over-extended branches by 1-2 metres length reduction, growing toward and over garden area. Group of Hornbeam (Left side of property, rear garden) Sectional dismantle using rigging equipment the declining TG4 Hornbeam group. 1x Oak / Hornbeam group (Neighbouring left rear garden) Reduce over-extended branches up to 3 metres length reduction, growing toward and over garden area. 2x Hornbeam group (left side + right side front of summer house) Sectional dismantle using rigging equipment Copsewood Estate Northwood: 1x Coniferous Tree to reduce over extended branches up to 2m length situated in the rear garden right hand side.

TPO 164 T24 1x Eucalyptus to reduce back to previous points up to 2.5m.

TPO 315 T1 1x Oak to reduce size by at least 3m radius 6m diameter all round to balance by cutting back to 25-50mm beyond previous reduction points. Reduce height by crown reduction to previous pruning points. Thin by removal of epicormic growth.